Tailgating Flag Pole and Wheel Stand Kit
This kit includes our 23 foot Tailgating Flag Pole and Wheel Stand.
The 23 Foot Tailgating Flag Pole is constructed of aluminum and includes six (6) telescoping sections which are adjustable from 60 inches up to 23 feet and any height in-between. Spinning Flag Clips are included to fly up to four (4) flags of varying sizes including 2x3, 3x5, 4x6, and 5x8 foot flags of any combination. Grommet clips are also included for easy changing of flags during your tailgating event. Finally, a large plastic Silver Ball Top and 18" foam Safety Fender Pad (optional use) are included.
Included in this bundle is our Wheel Stand Tire Mount. This tire base has an oversized 18" x 6" base plate with a 18" pole riser and is made of rust resistant steel and is powder coated grey color. The 18 inch oversized base plate allows for an extended distance from your vehicle's tire fender.
Setup is easy by attaching your flag grommets to the grommet clips. Loosen (turn clockwise) each section and extend the pole. Then lock (turn counterclockwise) each section. Extend each section of the pole to your desired height (maximum 23 feet) while sliding the spinning clips to your flag layout on the pole (1-4 flags). Leave a little room between the top and bottom flag clips so they spin freely and the flag(s) will fly tangle free in the wind. After the event is over, unlock the extended sections (turn clockwise) to reduce the telescoping pole to 60 inches. This provides for easy storage and transportation to your next event.
A quality product of Sports Flags Pennants Company™